Product Details

Machine Specification

Features

(1)

Unique patent, twice stamping

Dual-mode double-punch

① Nail head can be punched well even the shank is uneven.

② Big nail head.

③ Nail head with out knock marks to ensure consistency.

④ Uniform thickness of the nail cap diameter.

⑤ Hollow design nail die, no small head, no ash blacking, no clip crumbs, no cracking, no frequent dies demolition.

(2)

Nail blade holder uses the pendulum structure

① Short distance, low mechanical wear

② High precision, nail cutter works without touch, low tool wear.

③ More than 10 million times of single-blade shear, more time-saving and labor saving in the use of high speed nail making machine.

(3)

Feeding and rewinding structure

① High - precision feeding device. The error of each nail length is controlled within 0.3mm

② Unique wire feeding and retreating combination, each nail through the wire feeding, cutting, wire retreating, three mechanical action, the nail produced by our nail making machine will be completely separated from the nail shank to ensure quality.

Certification

Maintain Tips

1. When the automatic nail making machine is used, a large amount of lubrication is better within 15 days. Lubricate oil regularly to ensure that all lubricated parts are well lubricated.

2. After the automatic nail making machine is started, the standby device must be in normal operation before turning the wire-in handle to wire-in nails. The wire-in should be stopped first when parking.

3. Do not make adjustments during machine movement.

4. During the operation of the machine, attention should be paid to the temperature rise of each friction part and the occurrence of abnormal noise at any time

5. Disconnect the power supply first when repairing equipment or electrical appliances.

6. The original specifications of the nail making machine should be used for the equipment that needs to be replaced.

7. Keep the nail knife sharp.

8. Do not drive without removing the protective cover.

9. Keep the machine tidy and clean the nail mold frequently. Do not use rusty wire when nailing.

http://www.ffifasteners.com/